Torna indietro   BaroneRosso.it - Forum Modellismo > Categoria Automodellismo e Motomodellismo > Automodellismo Mot. Elettrico Off-Road


Rispondi
 
Strumenti discussione Visualizzazione
Vecchio 30 marzo 12, 15:41   #1 (permalink)  Top
User
 
L'avatar di Robby Naish
 
Data registr.: 16-10-2002
Residenza: Roma
Messaggi: 1.297
Nuovi Turnigy Trailblazer - 1/8 e 1/5

Ciao,

ho appena trovato questi nuovi modelli sulla warehouse tedesca di HK

Turnigy Trailblazer 1/8 4WD Brushless Monster Truck













The Turnigy Trailblazer is a high powered 1/8 4WD monster truck thats ready to crush the competition! With its powerful 14.8V 80A brushless system pre-installed, this truck has plenty of power to take on just about anything.

Large oil filled shocks, aluminum alloy drive shafts, 3mm 6061 T6 aluminum chassis, and sealed ball bearings all the way around shows that this truck means business!

It comes fully pre-assembled, and just requires your own 2CH radio system and batteries to get this truck running.

Features:
- 4 Wheel Drive System
- Almost Ready to Run (just install your own radio system)
- High Performance 2230 540KV Brushless Motor
- 80A EZRUN Brushless ESC
- 3mm 6061 T6 Aluminum Chassis
- Waterproof and Dustproof Sealed Gearbox
- Quality Differential with Four Bevel Gears
- Sealed Ball Bearings for Entire Model
- Aluminum Alloy Drive Shafts
- High Torque Metal Gear Servo Pre-installed

Specs:
Length: 504mm
Width: 385mm
Height: 188mm
Wheelbase: 335mm
Tire Size: 145x70mm
Ground Clearance: 46mm
Motor: 2230 540KV Brushless Inrunner (FB3650)
ESC: EZRUN-80A (EZRUN)
Servo: Std High Torque MG (9KG)

Required:
2ch Radio System (versione con radio circa 20 euro in piu)
14.8V (2 x 7.4V in series) 3000~3300mAh Lipo
Robby Naish non è collegato   Rispondi citando
Vecchio 30 marzo 12, 15:41   #2 (permalink)  Top
User
 
L'avatar di Robby Naish
 
Data registr.: 16-10-2002
Residenza: Roma
Messaggi: 1.297
Turnigy Trailblazer XT 1/5 4WD Brushless Race Truck















The Turnigy Trailblazer XT is a high powered 1/5 4WD racing truck thats ready to dominate the track! With its powerful 14.8V 80A brushless system pre-installed, this truck has plenty of power to take home the win.
Large oil filled shocks, aluminum alloy drive shafts, 3mm 6061 T6 aluminum chassis, front/rear anti-sway bars, and sealed ball bearings all the way around shows that this truck means business!
It comes fully pre-assembled, and almost ready to run. Just add your own 2.4gHz radio system, 14.8V batteries (2 x 7.4V) and this truck is ready to race!

Features:
- 4 Wheel Drive System
- 3 Diff Transmission
- Ready to Run (just add your own batteries)
- High Performance 1500KV Brushless Motor
- 80A EZRUN Brushless ESC
- 3mm 6061 T6 Aluminum Chassis
- Waterproof and Dustproof Sealed Gearbox
- Quality Differential with Four Bevel Gears
- Sealed Precision Ball Bearings for Entire Model
- Aluminum Alloy Drive Shafts
- High Torque Metal Gear Servo Pre-installed

Specs:
Length: 670mm
Width: 430mm
Height: 230mm
Wheelbase: 480mm
Tire Size: 150x70mm
Ground Clearance: 70mm
Motor: 1500KV Brushless Inrunner
ESC: EZRUN-80A


Required:
2ch Radio System (versione con radio circa 20 euro in piu)
14.8V (2 x 7.4V in series) 3000~3300mAh Lipo
Robby Naish non è collegato   Rispondi citando
Vecchio 30 marzo 12, 15:42   #3 (permalink)  Top
User
 
L'avatar di Robby Naish
 
Data registr.: 16-10-2002
Residenza: Roma
Messaggi: 1.297
Turnigy Trailblazer XT 1/5 4WD Brushless Race Truck














The Turnigy Trailblazer XB is a high powered 1/5 4WD racing buggy thats ready to dominate the track! With its powerful 14.8V 80A brushless system pre-installed, this buggy has plenty of power to take home the win.
Large oil filled shocks, aluminum alloy drive shafts, 3mm 6061 T6 aluminum chassis, front/rear anti-sway bars, 3 differential transmission system, and sealed ball bearings all the way around shows that this buggy means business!
It comes fully pre-assembled, and almost ready to run. Just add your own 2CH radio system and 14.8V batteries (2 x 7.4V) and this buggy is ready to race!

Features:
- 4 Wheel Drive System
- 3 Diff Transmission
- Alloy Steering Knuckles
- Almost Ready to Run (just add your own 2CH radio system and batteries)
- High Performance 1500KV Brushless Motor
- 80A EZRUN Brushless ESC
- 3mm 6061 T6 Aluminum Chassis
- Waterproof and Dustproof Sealed Gearbox
- Quality Differential with Four Bevel Gears
- Sealed Precision Ball Bearings for Entire Model
- Aluminum Alloy Drive Shafts
- High Torque Metal Gear Servo Pre-installed

Specs:
Length: 688mm
Width: 430mm
Height: 250mm
Wheelbase: 480mm
Tire Size: 150x70mm
Motor: 1500KV Brushless Inrunner
ESC: EZRUN-80A
Battery Tray Size: 140Lx47.5Wx29H (mm)


Required:
2ch Radio System (versione con radio circa 20 euro in piu)
14.8V (2 x 7.4V in series) 3000~3300mAh Lipo
Robby Naish non è collegato   Rispondi citando
Vecchio 30 marzo 12, 15:45   #4 (permalink)  Top
User
 
L'avatar di andry-96
 
Data registr.: 14-10-2011
Residenza: Brescia
Messaggi: 4.419
Citazione:
Originalmente inviato da Robby Naish Visualizza messaggio
Turnigy Trailblazer XT 1/5 4WD Brushless Race Truck














The Turnigy Trailblazer XB is a high powered 1/5 4WD racing buggy thats ready to dominate the track! With its powerful 14.8V 80A brushless system pre-installed, this buggy has plenty of power to take home the win.
Large oil filled shocks, aluminum alloy drive shafts, 3mm 6061 T6 aluminum chassis, front/rear anti-sway bars, 3 differential transmission system, and sealed ball bearings all the way around shows that this buggy means business!
It comes fully pre-assembled, and almost ready to run. Just add your own 2CH radio system and 14.8V batteries (2 x 7.4V) and this buggy is ready to race!

Features:
- 4 Wheel Drive System
- 3 Diff Transmission
- Alloy Steering Knuckles
- Almost Ready to Run (just add your own 2CH radio system and batteries)
- High Performance 1500KV Brushless Motor
- 80A EZRUN Brushless ESC
- 3mm 6061 T6 Aluminum Chassis
- Waterproof and Dustproof Sealed Gearbox
- Quality Differential with Four Bevel Gears
- Sealed Precision Ball Bearings for Entire Model
- Aluminum Alloy Drive Shafts
- High Torque Metal Gear Servo Pre-installed

Specs:
Length: 688mm
Width: 430mm
Height: 250mm
Wheelbase: 480mm
Tire Size: 150x70mm
Motor: 1500KV Brushless Inrunner
ESC: EZRUN-80A
Battery Tray Size: 140Lx47.5Wx29H (mm)


Required:
2ch Radio System (versione con radio circa 20 euro in piu)
14.8V (2 x 7.4V in series) 3000~3300mAh Lipo
80 a su un 1/5 mi sa che dura poco
__________________
Footy ITA 107
andry-96 non è collegato   Rispondi citando
Vecchio 30 marzo 12, 16:10   #5 (permalink)  Top
User
 
L'avatar di micheFBRIpeak
 
Data registr.: 22-10-2009
Residenza: Lucca
Messaggi: 1.362
Immagini: 9
Citazione:
Originalmente inviato da Robby Naish Visualizza messaggio
Ciao,

ho appena trovato questi nuovi modelli sulla warehouse tedesca di HK

Turnigy Trailblazer 1/8 4WD Brushless Monster Truck













The Turnigy Trailblazer is a high powered 1/8 4WD monster truck thats ready to crush the competition! With its powerful 14.8V 80A brushless system pre-installed, this truck has plenty of power to take on just about anything.

Large oil filled shocks, aluminum alloy drive shafts, 3mm 6061 T6 aluminum chassis, and sealed ball bearings all the way around shows that this truck means business!

It comes fully pre-assembled, and just requires your own 2CH radio system and batteries to get this truck running.

Features:
- 4 Wheel Drive System
- Almost Ready to Run (just install your own radio system)
- High Performance 2230 540KV Brushless Motor
- 80A EZRUN Brushless ESC
- 3mm 6061 T6 Aluminum Chassis
- Waterproof and Dustproof Sealed Gearbox
- Quality Differential with Four Bevel Gears
- Sealed Ball Bearings for Entire Model
- Aluminum Alloy Drive Shafts
- High Torque Metal Gear Servo Pre-installed

Specs:
Length: 504mm
Width: 385mm
Height: 188mm
Wheelbase: 335mm
Tire Size: 145x70mm
Ground Clearance: 46mm
Motor: 2230 540KV Brushless Inrunner (FB3650)
ESC: EZRUN-80A (EZRUN)
Servo: Std High Torque MG (9KG)

Required:
2ch Radio System (versione con radio circa 20 euro in piu)
14.8V (2 x 7.4V in series) 3000~3300mAh Lipo
Però.....
un monster 1/8 con esc XERUN completo a meno di 200€....
'zzo, per il cazzeggio non credo che ci sia niente di meglio che spendere poco e divertirsi tanto
micheFBRIpeak non è collegato   Rispondi citando
Vecchio 30 marzo 12, 16:27   #6 (permalink)  Top
User
 
L'avatar di Duzzo
 
Data registr.: 03-06-2007
Residenza: Genova
Messaggi: 3.822
io ho visto il buggy e devo dire che è un baraccoso pero è l'unico che un po mi piaceva cosi ad occhio il peso è grossomodo quello di un truggy e anche le proporzioni è solo un po allungato e gommato a doc .

.........sul kit ezrun da 80 A io non so che dire sulla carta per un mezzo 1/8 mi fa un po storgere il naso ma lu usa un amico su un truggy 1/8 con gomme da monster ormai da anni con le 4s e va sempre, lo usa con lipo un po scrause fa un paio di scariche e poi lo ripone ma va veramente da un milione di anni non si ferma mai .
__________________
Team C TM2V2 : Xerun V3-Xerun 8.5T-Savox 1257
Duzzo non è collegato   Rispondi citando
Vecchio 30 marzo 12, 17:00   #7 (permalink)  Top
User
 
L'avatar di Robby Naish
 
Data registr.: 16-10-2002
Residenza: Roma
Messaggi: 1.297
Citazione:
Originalmente inviato da micheFBRIpeak Visualizza messaggio
Però.....
un monster 1/8 con esc XERUN completo a meno di 200€....
'zzo, per il cazzeggio non credo che ci sia niente di meglio che spendere poco e divertirsi tanto
Straquoto!! E poi stando in europa, no dogana!! Secondo me ne venderanno a tonnellate.

Bisogna capire se i ricambi sono intercambiabili con altri Monster piu diffusi.. che dite?
Robby Naish non è collegato   Rispondi citando
Vecchio 31 marzo 12, 23:15   #8 (permalink)  Top
User
 
L'avatar di Robby Naish
 
Data registr.: 16-10-2002
Residenza: Roma
Messaggi: 1.297
Sembrerebbe sia l' Earthquake 8e ella Redcat, che in Usa è molto popolare



Redcat Racing Earthquake 8E Brushless Lipo RC Truck





Specifications:

Motor Type Electric Brushless 8T 2400RPM 540

Length 510mm

Width 380mm

Height 250mm

Wheelbase 325mm F/R

Ground Clearance 58mm

Fuel Tank Capacity Chassis Type 3.0mm 6061 Aluminum

Brake Type Shocks Oil filled Big Bore Shocks

Speed Control Brushless ESC EZRUN-80A

Battery Dual LIPO 7.4V Batteries (20c 3200Mah 2s) & Charger Included

Radio System Redcat DSM-2C 2.4GHz Remote & Receiver



http://www.youtube.com/v/dP3GfkFZHwg...ram%3E%3Cparam
Robby Naish non è collegato   Rispondi citando
Vecchio 03 aprile 12, 15:26   #9 (permalink)  Top
User
 
L'avatar di Bi7hazard
 
Data registr.: 12-02-2012
Residenza: Como
Messaggi: 2.391
io avrei gia 2x turnigy 3000mah da 7.4v, stando alle specifiche elencate dovrebbero essere copatibili
Bi7hazard non è collegato   Rispondi citando
Vecchio 03 aprile 12, 17:00   #10 (permalink)  Top
User
 
L'avatar di raceboy
 
Data registr.: 14-05-2008
Residenza: MILANO
Messaggi: 703
Io sono del parere che questo e' un hobby dove per divertirsi bisogna spendere, poi redcat e' famosa per la pessima qualita'
raceboy non è collegato   Rispondi citando
Rispondi

Bookmarks



Strumenti discussione
Visualizzazione

Regole di scrittura
Non puoi creare nuove discussioni
Non puoi rispondere alle discussioni
Non puoi inserire allegati
Non puoi modificare i tuoi messaggi

BB code è Attivato
Le faccine sono Attivato
Il codice [IMG] è Attivato
Il codice HTML è Disattivato
Trackbacks è Disattivato
Pingbacks è Disattivato
Refbacks è Disattivato


Discussioni simili
Discussione Autore discussione Forum Commenti Ultimo Commento
Collegare Turnigy 2650mAh a Turnigy 9X FabioPE Batterie e Caricabatterie 16 25 gennaio 13 17:22
Adattatore per caricare Turnigy 2650mAh Tx Pack con Turnigy Accucel-6 FabioPE Batterie e Caricabatterie 19 04 febbraio 12 12:56
Motoscafo a scoppio Trailblazer motore 26cc telecomando tarponauta Motoscafi con Motore Elettrico 1 14 settembre 11 22:43
nuovi motori turnigy blurex Elimodellismo Motore Elettrico 2 08 marzo 11 21:25



Tutti gli orari sono GMT +2. Adesso sono le 23:15.


Basato su: vBulletin versione 3.8.11
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
E' vietata la riproduzione, anche solo in parte, di contenuti e grafica. Copyright 1998/2019 - K-Bits P.I. 09395831002